Kruger Fan FDA 160 - FDA 200 - FDA 250 - FDA 280 - FDA 315 - FDA 355 - FDA 400 - FDA 450 - FDA 500 - FDA 560 - FDA

FDA Series - Double Inlet Centrifugal Fans - Forward Curved

The FDA series is DIDW centrifugal fan with forward curved (FC) impellers. The fans are suitable for supply and exhaust applications in commercial, process and industrial HVAC systems.

AMCA Air, Sound and FEG certified ranges are from 315 to 900. 

The operating limit of the FDA series is set according to the requirement of Class 1, 11 and 111 limit as defined in AMCA Standard 99-2408-69. The FDA seri4s is available in type S, C, T or X.

FDA series is also available in twin fan version with two double inlet fans mounted on the same shaft.

FC fans are operated at relatively low speeds and are used to deliver large air volumes against relatively low static pressures. The inherently light construction of the forward curved wheel does not permit it to be operated at speeds needed to generate high static pressure.

The typical application range of this type of fan is from 30 to 80% wide open airflow. Selecting an operating point below approximately 30% wide open may place the fan in an area of instability. Similarly, an operating point beyond 80% wide open typically produces noise and inefficiency.

The maximum static efficiency is from approximately 50 to 65% and occurs just to the right of the maximum static-pressure point on the fan performance curve.

Quick Facts

•  Size from 160 to 1400 mm

•  Capacities to 300,000 m3/h

•  Total pressure up to 2400 Pa

•  Suitable for use in AHU, packaged unit and ventilation

Application

For supply or exhaust application in commercial, institutions and industrial HVAC systems.

Testing

Both air and sound performance ratings are based on test to AMCA210-85 and AMCA300-95 Standards.

All wheels are statically and dynamically balanced to ISO1940 and AMCA204 - G2.5 Standards.